Technical Support

Caterpillar 320/320GC/323 Fault Code Parameters

This blog mainly describes the alarm code information of Carter's latest model 320/320GC/323. Since the previous 320D document has already explained the composition of the fault code, I will not repeat it now. Friends who are interested or do not understand can refer to the document I sent earlier.

The 320/320GC/323 machine has two ECMs, both of which have different fault codes. The codes are listed below:

299:41-3 8V DC power supply voltage is higher than normal

299:41-4 8V DC power supply voltage is lower than normal

299:96-3 Fuel level sensor voltage is higher than normal

299:96-4 Fuel level sensor voltage is lower than normal

299:247-9 SAE J1939 data link abnormal update speed

299:247-14 SAE J1939 special manual

299:262-3 5V DC sensor power supply voltage is higher than normal

299:262-4 5V DC sensor power supply voltage is lower than normal

299:376-3 Driving alarm voltage is higher than normal

299:376-5 Driving alarm current is lower than

Excavator Throttle Motor AC2000 Maintenance Method

 

 

 

 

1.Throttle Motor Failure Phenomenon

Test the resistance change of the throttle motor at different positions and use 24V to start the motor. However, when the motor is started with the same direction of driving voltage, the motor throttle flexible shaft extends to a certain length and then automatically retracts.

It is suspected that the hoist limit clip inside the motor is broken (similar to the bolt stripping), causing the flexible shaft to move in the opposite direction. In order to study the root cause of this motor failure, the motor was disassembled.

2. Disassembly of the outer casing To disassemble the outer casing, you only need to remove the six bolts on the outer ring.

3. Disassembly of the outer shell.The internal structure is mainly composed of drive motor, planetary reduction mechanism, potentiometer and other parts.

 

4. Disassembly of the drive motor.Remove the two bolts fixed to the housing and the four bolts connected

Los radiadores del tanque de agua desempeñan un papel crucial en el mantenimiento de temperaturas óptimas del motor, garantizando un rendimiento eficiente y evitando el sobrecalentamiento. Estos componentes esenciales están diseñados para disipar el calor generado por el motor, manteniéndolo dentro de un rango de funcionamiento seguro. En este artículo, exploraremos la funcionalidad, los beneficios y la importancia de los radiadores con tanque de agua en la industria automotriz.

Es difícil encontrar la bomba hidráulica principal de repuesto CORRECTA y devolver este producto debido a su alto precio y gran peso. Entonces, ¿cómo puede asegurarse de encontrar la bomba adecuada la primera vez?

 

Es común encontrar el número de pieza en un libro de piezas y luego comprar la bomba hidráulica original para asegurarse de que está buscando la correcta. Sin embargo, este método te costará mucho, ya que la pieza original es más cara de lo que pensabas.

Por eso, a continuación se ofrecen algunos consejos y ejemplos que le ayudarán a encontrar la bomba hidráulica adecuada a un coste menor.

El paso más importante que debe realizar es: busque el número de fabricante en la placa de identificación de su bomba hidráulica.

Hay muchos fabricantes de bombas hidráulicas, incluidos Rexroth, Uchida, Kawasaki, Kayaba, Nachi, Sauer Danfoss, Eaton, etc. Algunas de estas bombas se venderán a fabricantes de excavadoras, como Komatsu, Hitachi, Cat, etc. Otros se venderán en sus propios mercados.

1. The generator does not operate according to the specified technical conditions, such as the stator voltage is too high and the iron loss increases; If the load current is too large, the copper loss of stator winding increases; The frequency is too low, which slows down the speed of the cooling fan and affects the heat dissipation of the generator;

The excavator must be maintained frequently on weekdays. If it is not well maintained, its service life will not be long. It is not difficult to maintain the excavator. Here are some maintenance methods for your reference.

Check after purchasing: Disassemble all packaging and cover, check random attachment, and save the purchase voucher, qualification certificate and after -sales service card.

When checking the engine, we must remove the air pipe after the engine is turned off and cooled.Turn the impeller in the middle by hand, the impeller normally has a small gap and can rotate smoothlyIf it freezes, it means the supercharger is locked.See what's going wrong, take it off now, we'll take a look after we take out the supercharger.

An engine needs two raw materials to work: gasoline and air. Gasoline is purchased by us and added to the fuel tank of the Excaavtor. After being filtered by the fuel supply system, it is sent to the engine combustion chamber and mixed with air for combustion.

In the realm of automotive engineering, turbochargers have emerged as a game-changer, revolutionizing the way engines perform. These ingenious devices provide a significant power boost to engines, enhancing performance and efficiency.